Category:OSW74bf728019bd4cc3a8a0833bd54f5338: Difference between revisions

                 "description": "Enumeration with the values, portable battery; starting, lighting and ignition battery (SLI); light means of transport battery (LMT); electric vehicle battery (EV), industrial battery and incorporated battery.",

                 "description": "Characteristic for Identifiers."

                 "description": "Describes a Property which contains plain text. This is intended exclusively for human readable strings, not for identifiers, measurement values, etc."

                 "description": "Constraint that ensures that the standard keys and custom key prefixes can be used.",

                 "description": "The value of an identifier."

                 "description": "A list of key value pairs for local identifiers, which are composed of a key and a corresponding value.",

                         "description": "The key of a local identifier. ",

                         "description": "The value of an identifier.",

                 "description": "A single serialized part may have multiple attributes, that uniquely identify a that part in a specific dataspace (e.g. the manufacturer`s dataspace)",

                 "description": "Constraint that ensures that the predefined keys are used.",

                 "description": "The value of an identifier."

                 "description": "A list of key value pairs for local identifiers, which are composed of a key and a corresponding value.",

                         "description": "The key of a local identifier.",

                         "description": "The value of an identifier.",

                 "description": "A batch may have multiple attributes, which uniquely identify that batch in a specific dataspace(e.g. the manufacturer`s dataspace)",

                 "description": "The part ID is a multi-character string, usually assigned by an ERP system."

                 "description": "Part name in string format from the respective system in the value chain."

                 "description": "Characteristic for the part type.",

                         "description": "Part ID as assigned by the manufacturer of the part. The part ID identifies the part in the manufacturer`s dataspace. The part ID references a specific version of a part. The version number must be included in the part ID if it is available. The part ID does not reference a specific instance of a part and must not be confused with the serial number.",

                         "description": "Name of the part as assigned by the manufacturer.",

                 "description": "Code entity with code key and value.",

                         "description": "The code key for the identification of the product. Examples are GTIN, hash, DID, ISBN, TARIC. This attribute is mentioned in the ESPR proposal from March 30th, 2022 ANNEX III:\n(b) the unique product identifier at the level indicated in the applicable delegated act adopted pursuant to Article 4;\n(c) the Global Trade Identification Number as provided for in standard ISO/IEC 15459-6 or equivalent of products or their parts;\n(d) relevant commodity codes, such as a TARIC code as defined in Council Regulation (EEC) No 2658/87.",

                         "description": "The code value for the identification of the product in regard to the chosen code name.",

                 "description": "A list of additional codes.",

                 "description": "Data Carrier Characteristic for the product.",

                         "description": "The type of data carrier such as a QR code on the product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Article 8:\n(2) (b) the types of data carrier to be used.",

                         "description": "The positioning of data carrier on the product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Article 8:\n(2) (c) the layout in which the data carrier shall be presented and its positioning.",

                 "description": "Identified classification standards that align to the Catena-X needs."

                 "description": "It can be numeric or a string, depending on the chosen classification standard."

                 "description": "Encapsulates data related to the classification of the part.",

                         "description": "Identified classification standards that align to the Catena-X needs.",

                         "description": "The classification ID of the part type according to the corresponding standard definition mentioned in the key value pair.",

                         "description": "Optional property describing the classification standard.",

                 "description": "Classification characteristic enabling a set of further properties.",

                 "description": "Identification information of the product.",

                         "description": "Identifier for a serial part if available. This is mentioned in the ESPR provisional agreement from January 9th, 2024 Recital (27):\n[...] an 'item' usually means a single unit of a model.",

                         "description": "Identifier for a batch part if available. Identifier for a serial part if available. This is mentioned in the ESPR provisional agreement from January 9th, 2024 Recital (27):\n[...] a 'batch' usually means a subset of a specific model composed of all products produced in a specific manufacturing plant at a specific moment in time [...].",

                         "description": "Identifier on the level of a part model or type. Identifier for a serial part if available. This is mentioned in the ESPR provisional agreement from January 9th, 2024 Recital (27):\n[...] A 'model' usually means a version of a product of which all units share the same technical characteristics relevant for the ecodesign requirements and the same model identifier [...].",

                         "description": "Codes for identification.",

                         "description": "The type and layout of the data carrier on the product. These are mentioned in the ESPR proposal from March 30th, 2022 Article 8:\n(b) the types of data carrier to be used;\n(c) the layout in which the data carrier shall be presented and its positioning;\nArticle 2 defines:\n(30) 'data carrier' means a linear bar code symbol, a two-dimensional symbol or other automatic identification data capture medium that can be read by a device.",

                         "description": "Property describing the classification of a part.",

                 "description": "Battery identification involves specific battery identifiers, including those assigned locally by the manufacturer.",

                         "description": "The battery category, which can be a portable battery; starting, lighting and ignition battery (SLI); light means of transport battery (LMT); electric vehicle battery (EV), industrial battery and incorporated battery. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (a) and refers to ANNEX VI Part A:\n2. the battery category and information identifying the battery in accordance with Article 38(6).",

                         "description": "The unique identifier of the product, when it is placed on the market. Through this identifier a web link can be accessed. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Article 77:\n3. The battery passport shall be accessible through the QR code referred to in Article 13(6) which links to a unique identifier that the economic operator placing the battery on the market shall attribute to it. The QR code and the unique identifier shall comply with the ISO/IEC standards 15459-1:2014, 15459-2:2015, 15459-3:2014, 15459-4:2014, 15459-5:2014 and 15459-6:2014 or their equivalent.\nDefined is the QR code in Article 3:\n(24) \"QR code\" means a machine-readable matrix code that links to information as required by this Regulation.\n(66) \"unique identifier\" means a unique string of characters for the identification of batteries that also enables a web link to the battery passport.",

                         "description": "Battery chemistry refers to the specific chemical composition and reactions that occur within a battery to produce and store electrical energy. The chemistry has to be stated as detailed as possible for example: the Nickel Cobalt Manganese battery 'NCM'. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (a) and refers to ANNEX VI Part A:\n7. the chemestry.",

                         "description": "Identification information of the product, especially identifiers and codes. These are mentioned in the ESPR provisional agreement from January 9th, 2024 ANNEX III:\n(b) the unique product identifier at the level indicated in the applicable delegated act adopted pursuant to Article 4.\nAdditionally in Article 9 regarding general requirements for the product passport is stated that:\nA product passport shall meet the following conditions:\n(a) it shall be connected through a data carrier to a persistent unique product identifier;\n(e) the information included in the product passport shall refer to the product model, batch, or item as specified in the delegated act adopted pursuant to Article 4.\nArticle 2 Definitions: \n(31) 'unique product identifier' means a unique string of characters for the identification of products that also enables a web link to the product passport;\nRecital (27): A 'model' usually means a version of a product of which all units share the same technical characteristics relevant for the ecodesign requirements and the same model identifier, a 'batch' usually means a subset of a specific model composed of all products produced in a specific manufacturing plant at a specific moment in time and an 'item' usually means a single unit of a model.",

                 "description": "Constraint fo a timestamp in the format (yyyy-mm-dd).",

                 "description": "The provided regular expression ensures that the BPNA is composed of prefix 'BPNA', 10 digits and two alphanumeric letters.",

                 "description": "The entity for a facility with the BPNA identifier.",

                         "description": "The identifier used for a location. This attribute is mentioned in the ESPR provisional agreement from January 9th 2024 Annex III:\n(i) unique facility identifiers;\nArticle 2 Definitions: (33) 'unique facility identifier' means a unique string of characters for the identification of locations or buildings involved in the value chain of a product or used by actors involved in the value chain of a product.",

                 "description": "List of facilities.",

                 "description": "The provided regular expression ensures that the BPNL is composed of prefix 'BPNL', 10 digits and two alphanumeric letters.",

                 "description": "Manufacturing information.",

                         "description": "The identifier used for a location.  In the CATENA-X use case, the BPNA can be stated. This attribute is mentioned in the ESPR provisional agreement from January 9th 2024 Annex III:\n(i) unique facility identifiers;\nArticle 2 Definitions: (33) 'unique facility identifier' means a unique string of characters for the identification of locations or buildings involved in the value chain of a product or used by actors involved in the value chain of a product.",

                         "description": "The main manufacturer, if different from the passport owner, represented by an identification number. In the Catena-X use case, the BPNL can be stated. This attribute is mentioned in the ESPR provisional agreement from January 9th 2024 Annex III:\n(h) unique operator identifiers other than that of the manufacturer;\n(k) the name, contact details and unique operator identifier code of the economic operator established in the Union responsible for carrying out the tasks set out in Article 4 of Regulation (EU) 2019/1020, or Article 15 of Regulation (EU) [.../...] on general product safety, or similar tasks pursuant to other EU legislation applicable to the product.",

                         "description": "The timestamp in the format (yyyy-mm-dd) of the manufacturing date as the final step in production process (e.g. final quality check, ready-for-shipment event).",

                 "description": "Characteristic includes details for operational data.",

                         "description": "Putting into service is the transition from a state of readiness to actual use or operation. The date should be formatted as yyyy-mm-dd. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex VII Part B: \n1.the date of manufacture of the battery and, where appropriate, the date of putting into service;\nDefined is \"putting into service\" in Article 3:\n(18) \"putting into service\" means the first use, for its intended purpose, in the Union, of a battery, without having been previously placed on the market.",

                         "description": "Manufacturing information of the product. In the CATENA-X use case, the BPNL and BPNA can be stated. These attributes are mentioned in the ESPR provisional agreement from January 9th 2024 Annex III:\n(h) unique operator identifiers other than that of the manufacturer;\n(k) the name, contact details and unique operator identifier code of the economic operator established in the Union responsible for carrying out the tasks set out in Article 4 of Regulation (EU) 2019/1020, or Article 15 of Regulation (EU) [.../...] on general product safety, or similar tasks pursuant to other EU legislation applicable to the product.",

                 "description": "Characteristic for the life span value as an integer."

                 "description": "Enumeration with the possible units day, month, cycle, year and runningOrOperatingHour.",

                 "description": "Characteristic for the warranty.",

                         "description": "The value as an integer for the respective lifespan.",

                         "description": "The unit of the respective lifespan expressed through the possible units day, month, cycle, year and runningOrOperatingHour.",

                 "description": "The quantity value associated with the unit expressed as float."

                 "description": "The unit of a linear attribute that may be used for height, width, length and diameter.",

                 "description": "Characteristic for linear measurements of an item.",

                         "description": "The quantity value associated with the unit.",

                         "description": "The unit of a linear attribute.",

                 "description": "Enumeration for mass units.",

                 "description": "Characteristic for mass measurements of an item.",

                         "description": "The quantity value associated with the unit.",

                         "description": "The unit of a mass related attribute.",

                 "description": "Characteristic for the physical dimensions.",

                         "description": "The height of the item measured in a specific linear unit which can be declared in the corresponding unit attribute.",

                         "description": "The length of the item measured in a specific linear unit which can be declared in the corresponding unit attribute.",

                         "description": "The width of the item measured in a specific linear unit which can be declared in the corresponding unit attribute.",

                         "description": "Weight of the product measured in a specific mass unit which can be declared in the corresponding unit attribute.  This attribute is mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(2) (b) (i) information on the performance of the product in relation to the product parameters referred to in Annex I;\nAnnex I (i) weight and volume of the product [...].",

                 "description": "Characteristic for the product characteristics.",

                         "description": "The warranty of the battery. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in ANNEX XIII:\n(m) period for which the commercial warranty for the calendar life applies.",

                         "description": "The weight of the battery. For calculation of the energy density, the volume is also needed. The energy density of a battery is measured in watt-hours per kilogram (Wh/kg) and watt-hours per liter (Wh/L). These measures indicate how much energy a battery can store relative to its weight and volume, respectively. Other measurements are optional.These are mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1)(a) and refers to Annex VI Part A:\n5. the weight.",

                 "description": "Constraint for a maximum of 100 characters.",

                 "description": "Entity for a document with a header, type and content.",

                         "description": "The content of the document e.g a link.",

                         "description": "The type of content which can be expected in the \"content\" property. Examples are a link, restricted link, pdf, excel, etc.",

                         "description": "The header as a short description of the document with a maximum of 100 characters.",

                 "description": "List of documents.",

                 "description": "Characteristic for sustainability documents of the battery.",

                         "description": "Documentation about separate collection of batteries involve information on how to properly collect, handle, and recycle batteries to ensure environmental sustainability and compliance with regulations. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (s), refers to  Article 74:\n1. In addition to the information referred to in Article 8a(2) of Directive 2008/98/EC, producers or, where appointed in accordance with Article 57(1), producer responsibility organisations shall make available to end-users and distributors the following information regarding the prevention and management of waste batteries with regard to the categories of batteries that they supply within the territory of a Member State:\n(a) the role of end-users in contributing to waste prevention, including by information on good practices and recommendations concerning the use of batteries aimed at extending their use phase and the possibilities of re-use, preparation for re-use, preparation for repurposing, repurposing and remanufacturing;\n(b) the role of end-users in contributing to the separate collection of waste batteries in accordance with their obligations under Article 64 to allow their treatment;\n(c) the separate collection, take-back and collection points, preparation for re-use, preparation for repurposing and treatment available for waste batteries;\n(d) the necessary safety instructions to handle waste batteries, including in relation to the risks associated with, and the handling of, batteries containing lithium;\n(e) the meaning of the labels and symbols on batteries in accordance with Article 13 or printed on their packaging or in the documents accompanying batteries; and\n(f) the impact of substances, in particular hazardous substances, present in batteries on the environment and on human health or the safety of persons, including the impact due to inappropriate discarding of waste batteries, such as littering or discarding as unsorted municipal waste.",

                         "description": "Documentation about waste prevention for batteries which include guidelines, recommendations, and information on minimizing the environmental impact associated with the use and disposal of batteries. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (s), refers to  Article 74 (1) which call Article 8a of Directive 2008/98/EC:\n2. Member States shall take the necessary measures to ensure that the waste holders targeted by the extended producer responsibility schemes established in accordance with Article 8 (1), are informed about waste prevention measures, centres for re-use and preparing for re-use, take-back and collection systems, and the prevention of littering. Member States shall also take measures to create incentives for the waste holders to assume their responsibility to deliver their waste into the separate collection systems in place, notably, where appropriate, through economic incentives or regulations.",

                         "description": "Optional disclosure regarding the EU taxonomy, with the choice to voluntarily provide the EU Taxonomy disclosure through the battery passport.",

                         "description": "Voluntarily making the Sustainability Report available via the battery passport. A report containing the information concerning the sustainability in form of a document.",

                 "description": "Constraint for only positive values.",

                 "description": "Enumeration of the 19 impact categories in accordance to EN15804+A2.",

                 "description": "Footprint Entity for the carbon and environmental footprint with the total value, unit, impact category type, lifecycle, rulebook, declaration, performance class and the facility.",

                         "description": "The value of the footprint of the product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Annex I:\n(l) the environmental footprint of the product, expressed as a quantification, in accordance with the applicable delegated act, of a product's life cycle environmental impacts, whether in relation to one or more environmental impact categories or an aggregated set of impact categories;\n(m) the carbon footprint of the product;\n(ma) the material footprint of the product.\n",

                         "description": "The applied rulebook for the environmental footprint of the product.",

                         "description": "The lifecycle stage, to which the environmental footprint corresponds. These could be for example \"raw material acquisition and pre-processing\", \"main product production\", \"distribution\" or \"end of life and recycling\".",

                         "description": "The unit of measurement of the environmental impact category. For each impact category a specific unit is used. If an aggregation is used, utilize the normalization and weighting methods used in the referenced rulebook.",

                         "description": "The type of the environmental footprint of the product. This could be one of the environmental impact categories. This attribute is mentioned in the ESPR provisional agreement from January 9th 2024 Article 7:\n(2)(b)(i) information on the performance of the product in relation to one or more of the product parameters referred to in Annex I, including a scoring of reparability or durability, carbon footprint or environmental footprint;\nAnnex I:\n(l) the environmental footprint of the product, expressed as a quantification, in accordance with the applicable delegated act, of a product's life cycle environmental impacts, whether in relation to one or more environmental impact categories or an aggregated set of impact categories.\n(m) the carbon footprint of the product;\n(ma) the material footprint of the product.",

                         "description": "The performance classification of the footprint.",

                         "description": "The manufacturing plant of the footprint in the specific lifecycle phase.",

                         "description": "The footprint declaration in the format of a link ",

                 "description": "Footprint List for the environmental footprint.",

                 "description": "Enumeration defined as original, repurposed, re-used, remanufactured or waste.",

                 "description": "Characteristic for sustainability attributes.",

                         "description": "Sustainability documents of the battery.",

                         "description": "The carbon footprint of the battery calculated as kg of carbon dioxide equivalent per one kWh of the total energy provided by the battery over its expected service life. Relevant attributes are the value, the unit, the referenced rulebook, the lifecycle where applied, the declaration, the performance class, the type (PCF), the declaration and the facility. These attributes are mentioned in the Battery regulation 2023/1542 from 12 July 2023 in several places.\nAnnex XIII (1) (c) refers to Article 7 (2) which refers to Article 7 (1)(d):\n1. For electric vehicle batteries, rechargeable industrial batteries with a capacity greater than 2 kWh and LMT batteries a carbon footprint declaration shall be drawn up for each battery model per manufacturing plant, in accordance with the implementing act referred to in the fourth subparagraph and containing, at least, the following information:\n[...] (d) the carbon footprint of the battery, calculated as kg of carbon dioxide equivalent per one kWh of the total energy provided by the battery over its expected service life;\nAnd as well in Article 7:\n2. Electric vehicle batteries, rechargeable industrial batteries with a capacity greater than 2 kWh and LMT batteries shall bear a conspicuous, clearly legible and indelible label indicating the carbon footprint of the battery referred to in paragraph 1, first subparagraph, point (d) and declaring the carbon footprint performance class to which the relevant battery model per manufacturing plant corresponds.\nFurther specified in Annex XIII (1) (c) and refers to Article 7 (1):\n[...] The Commission shall, by 18 February 2024 for electric vehicle batteries, 18 February 2025 for rechargeable industrial batteries, except those with external storage, 18 February 2027 for LMT batteries and 18 February 2029 for industrial batteries with external storage, adopt:\n(a) a delegated act in accordance with Article 89 to supplement this Regulation by establishing the methodology for the calculation and verification of the carbon footprint of the battery referred to in the first subparagraph, point (d), in accordance with the essential elements set out in Annex II;\nThese parameters are defined by Article 3:\n(21) \"carbon footprint\" means the sum of greenhouse gas emissions and greenhouse gas removals in a product system, expressed as carbon dioxide equivalents and based on a Product Environmental Footprint (PEF) study using the single impact category of climate change;\nand defined by Annex II (2):\n(e) \"life cycle\" means the consecutive and interlinked stages of a product system, from raw material acquisition or generation from natural resources to final disposal (ISO 14040:2006 or an equivalent standard).",

                         "description": "The status of the product (original, repurposed, re-used, remanufactured or waste) to indicated, whether it is a used product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Annex I:\n(j) incorporation of used components.",

                 "description": "Range constraint for a positive percentage value.",

                 "description": "Represents a boolean value (i.e. a \"flag\")."

                 "description": "Characteristic to describe the active material.",

                         "description": "The location of the substances of concern within the product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (b) the location of the substances of concern within the product.",

                         "description": "The share of the material, which is recovered recycled content from the product. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;",

                         "description": "Documentation accompanying the material.",

                         "description": "A flag, if the material is a critical raw material. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;\nIn Annex II of the connected proposal Act of Critical Raw Materials, a list of critical raw materials can be found.",

                 "description": "Enumeration of possible units of concentration with percent, volume percent, parts per thousand, parts per million, parts per billion and parts per trillion.",

                 "description": "Characteristic for specific hazardous/active lead information.",

                         "description": "An accumulation of documents that refer to the impact, especially hazardous substances, on the battery. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (s), refers to  Article 74:\n1. In addition to the information referred to in Article 8a(2) of Directive 2008/98/EC, producers or, where appointed in accordance with Article 57(1), producer responsibility organisations shall make available to end-users and distributors the following information regarding the prevention and management of waste batteries with regard to the categories of batteries that they supply within the territory of a Member State:\n[...]\n(f) the impact of substances, in particular hazardous substances, present in batteries on the environment and on human health or the safety of persons, including the impact due to inappropriate discarding of waste batteries, such as littering or discarding as unsorted municipal waste.",

                         "description": "A flag, if the material is a critical raw material. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;\nIn Annex II of the connected proposal Act of Critical Raw Materials, a list of critical raw materials can be found.",

                         "description": "Documentation accompanying the material.",

                         "description": "The share of the material, which is recovered recycled content from the product. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;",

                         "description": "The location of the substances of concern within the product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (b) the location of the substances of concern within the product.",

                         "description": "Concentration of the material at the level of the product. This attribute is specially mentioned for substances of concern mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (c) the concentration, maximum concentration or concentration range of the substances of concern, at the level of the product [...].\nOther substances are mentioned for the purpose of recycling in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(d) design for recycling, ease and quality of recycling as expressed through: use of easily recyclable materials, safe, easy and non-destructive access to recyclable components and materials or components and materials containing hazardous substances and material composition and homogeneity, possibility for high-purity sorting, number of materials and components used, use of standard components, use of component and material coding standards for the identification of components and materials, number and complexity of processes and tools needed, ease of nondestructive disassembly and re-assembly, conditions for access to product data, conditions for access to or use of hardware and software needed.\n",

                         "description": "The unit of concentration chosen from an enumeration: mass percent, volume percent, parts per thousand, parts per million, parts per billion and  parts per trillion.",

                 "description": "Enumeration of different systems and organizations related to the identification and classification of chemical substances in the field of chemistry. The enumeration values are EC or CAS.",

                 "description": "Id Entity with identifier, name and list type.",

                         "description": "The substance identification, in accordance with the specification in the attribute for the list type.",

                         "description": "The type of standard used for the identification of the substances. Selected can be for example CAS, IUPAC or EC.",

                         "description": "The name of the material which is present in the product.",

                 "description": "List of ids for the identification.",

                 "description": "Entity for other active materials.",

                         "description": "The location of the substances of concern within the product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (b) the location of the substances of concern within the product.",

                         "description": "The share of the material, which is recovered recycled content from the product. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;",

                         "description": "Documentation accompanying the material.",

                         "description": "A flag, if the material is a critical raw material. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;\nIn Annex II of the connected proposal Act of Critical Raw Materials, a list of critical raw materials can be found.",

                         "description": "The chemical material name and identification, in accordance with the specification in the attribute for the list type. Preference is given to the IUPAC name. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Article 7:\n(5) (a) the name of the substances of concern present in the product, as follows:\n - name(s) in the International Union of Pure and Applied Chemistry (IUPAC) nomenclature, or another international name when IUPAC name is not available; \n- other names (usual name, trade name, abbreviation);\n- European Community (EC) number, as indicated in the European Inventory of Existing Commercial Chemical Substances (EINECS), the European List of Notified Chemical Substances (ELINCS) or the No Longer Polymer (NLP) list or assigned by the European Chemicals Agency (ECHA), if available;\n- the Chemical Abstract Service (CAS) name(s) and number(s), if available; .",

                 "description": "List of other active materials.",

                 "description": "Characteristic for the active materials.",

                         "description": "Information about the percentage of recovered nickel from waste. These attribute are mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1)(e) refers to Article 8:\n1. From 18 August 2028 or 24 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, electric vehicle batteries and SLI batteries that contain cobalt, lead, lithium or nickel in active materials, shall be accompanied by documentation containing information about the percentage share of cobalt, lithium or nickel that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer waste, and the percentage share of lead that is present in the battery and that has been recovered from waste, for each battery model per year and per manufacturing plant.",

                         "description": "Information about the percentage of recovered lithium from waste. These attribute are mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1)(e) refers to Article 8:\n1. From 18 August 2028 or 24 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, electric vehicle batteries and SLI batteries that contain cobalt, lead, lithium or nickel in active materials, shall be accompanied by documentation containing information about the percentage share of cobalt, lithium or nickel that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer waste, and the percentage share of lead that is present in the battery and that has been recovered from waste, for each battery model per year and per manufacturing plant.",

                         "description": "Information about the percentage of recovered cobalt from waste. These attribute are mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1)(e) refers to Article 8:\n1. From 18 August 2028 or 24 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, electric vehicle batteries and SLI batteries that contain cobalt, lead, lithium or nickel in active materials, shall be accompanied by documentation containing information about the percentage share of cobalt, lithium or nickel that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer waste, and the percentage share of lead that is present in the battery and that has been recovered from waste, for each battery model per year and per manufacturing plant.",

                         "description": "Information about the lead in the battery. As this is an active and hazardous material, all properties for hazardous as well as active materials are required. These attribute are mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1)(e) refers to Article 8:\n1. From 18 August 2028 or 24 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, electric vehicle batteries and SLI batteries that contain cobalt, lead, lithium or nickel in active materials, shall be accompanied by documentation containing information about the percentage share of cobalt, lithium or nickel that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer waste, and the percentage share of lead that is present in the battery and that has been recovered from waste, for each battery model per year and per manufacturing plant.\nAnd for hazardous materials this is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (a) refers to Annex VI Part A: \n8. the hazardous substances present in the battery, other than mercury, cadmium or lead;\nAdditionally in Article 13:\n5. All batteries containing more than 0,002 % cadmium or more than 0,004 % lead, shall be marked with the chemical symbol for the metal concerned: Cd or Pb.\nDefined in Article 3:\n(52) \"hazardous substance\" means a substance classified as hazardous pursuant to Article 3 of Regulation (EC) No 1272/2008.",

                         "description": "Other active materials in the battery.",

                 "description": "Material attributes for hazardous materials.",

                         "description": "An accumulation of documents that refer to the impact, especially hazardous substances, on the battery. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (s), refers to  Article 74:\n1. In addition to the information referred to in Article 8a(2) of Directive 2008/98/EC, producers or, where appointed in accordance with Article 57(1), producer responsibility organisations shall make available to end-users and distributors the following information regarding the prevention and management of waste batteries with regard to the categories of batteries that they supply within the territory of a Member State:\n[...]\n(f) the impact of substances, in particular hazardous substances, present in batteries on the environment and on human health or the safety of persons, including the impact due to inappropriate discarding of waste batteries, such as littering or discarding as unsorted municipal waste.",

                         "description": "Concentration of the material at the level of the product. This attribute is specially mentioned for substances of concern mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (c) the concentration, maximum concentration or concentration range of the substances of concern, at the level of the product [...].\nOther substances are mentioned for the purpose of recycling in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(d) design for recycling, ease and quality of recycling as expressed through: use of easily recyclable materials, safe, easy and non-destructive access to recyclable components and materials or components and materials containing hazardous substances and material composition and homogeneity, possibility for high-purity sorting, number of materials and components used, use of standard components, use of component and material coding standards for the identification of components and materials, number and complexity of processes and tools needed, ease of nondestructive disassembly and re-assembly, conditions for access to product data, conditions for access to or use of hardware and software needed.\n",

                         "description": "The location of the substances of concern within the product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (b) the location of the substances of concern within the product.",

                         "description": "The unit of concentration chosen from an enumeration: mass percent, volume percent, parts per thousand, parts per million, parts per billion and  parts per trillion.",

                         "description": "A flag, if the material is a critical raw material. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;\nIn Annex II of the connected proposal Act of Critical Raw Materials, a list of critical raw materials can be found.",

                         "description": "Documentation accompanying the material.",

                 "description": "Entity for other hazardous materials.",

                         "description": "An accumulation of documents that refer to the impact, especially hazardous substances, on the battery. This attribute is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (s), refers to  Article 74:\n1. In addition to the information referred to in Article 8a(2) of Directive 2008/98/EC, producers or, where appointed in accordance with Article 57(1), producer responsibility organisations shall make available to end-users and distributors the following information regarding the prevention and management of waste batteries with regard to the categories of batteries that they supply within the territory of a Member State:\n[...]\n(f) the impact of substances, in particular hazardous substances, present in batteries on the environment and on human health or the safety of persons, including the impact due to inappropriate discarding of waste batteries, such as littering or discarding as unsorted municipal waste.",

                         "description": "The unit of concentration chosen from an enumeration: mass percent, volume percent, parts per thousand, parts per million, parts per billion and  parts per trillion.",

                         "description": "Concentration of the material at the level of the product. This attribute is specially mentioned for substances of concern mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (c) the concentration, maximum concentration or concentration range of the substances of concern, at the level of the product [...].\nOther substances are mentioned for the purpose of recycling in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(d) design for recycling, ease and quality of recycling as expressed through: use of easily recyclable materials, safe, easy and non-destructive access to recyclable components and materials or components and materials containing hazardous substances and material composition and homogeneity, possibility for high-purity sorting, number of materials and components used, use of standard components, use of component and material coding standards for the identification of components and materials, number and complexity of processes and tools needed, ease of nondestructive disassembly and re-assembly, conditions for access to product data, conditions for access to or use of hardware and software needed.\n",

                         "description": "The chemical material name and identification, in accordance with the specification in the attribute for the list type. Preference is given to the IUPAC name. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Article 7:\n(5) (a) the name of the substances of concern present in the product, as follows:\n - name(s) in the International Union of Pure and Applied Chemistry (IUPAC) nomenclature, or another international name when IUPAC name is not available; \n- other names (usual name, trade name, abbreviation);\n- European Community (EC) number, as indicated in the European Inventory of Existing Commercial Chemical Substances (EINECS), the European List of Notified Chemical Substances (ELINCS) or the No Longer Polymer (NLP) list or assigned by the European Chemicals Agency (ECHA), if available;\n- the Chemical Abstract Service (CAS) name(s) and number(s), if available; .",

                         "description": "Documentation accompanying the material.",

                         "description": "A flag, if the material is a critical raw material. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;\nIn Annex II of the connected proposal Act of Critical Raw Materials, a list of critical raw materials can be found.",

                         "description": "The location of the substances of concern within the product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (b) the location of the substances of concern within the product.",

                 "description": "List of other hazardous materials.",

                 "description": "Hazardous Substance Characteristic for the battery chemical materials.",

                         "description": "Information about the presence of cadmium in the battery. Therefore, a concentration and the location within the battery has to be given. This is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (a) refers to Annex VI Part A: \n8. the hazardous substances present in the battery, other than mercury, cadmium or lead;\nDefined in Article 3:\n(52) \"hazardous substance\" means a substance classified as hazardous pursuant to Article 3 of Regulation (EC) No 1272/2008.\nAdditionally in Article 13:\n5. All batteries containing more than 0,002 % cadmium or more than 0,004 % lead, shall be marked with the chemical symbol for the metal concerned: Cd or Pb.",

                         "description": "Information about the presence of mercury in the battery. Therefore, a concentration and the location within the battery has to be given. This is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (a) refers to Annex VI Part A: \n8. the hazardous substances present in the battery, other than mercury, cadmium or lead;\nDefined in Article 3:\n(52) \"hazardous substance\" means a substance classified as hazardous pursuant to Article 3 of Regulation (EC) No 1272/2008.",

                         "description": "Other hazardous materials.",

                         "description": "Information about the lead in the battery. As this is an active and hazardous material, all properties for hazardous as well as active materials are required. These attribute are mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1)(e) refers to Article 8:\n1. From 18 August 2028 or 24 months after the date of entry into force of the delegated act referred to in the third subparagraph, whichever is the latest, industrial batteries with a capacity greater than 2 kWh, except those with exclusively external storage, electric vehicle batteries and SLI batteries that contain cobalt, lead, lithium or nickel in active materials, shall be accompanied by documentation containing information about the percentage share of cobalt, lithium or nickel that is present in active materials and that has been recovered from battery manufacturing waste or post-consumer waste, and the percentage share of lead that is present in the battery and that has been recovered from waste, for each battery model per year and per manufacturing plant.\nAnd for hazardous materials this is mentioned in the Battery regulation 2023/1542 from 12 July 2023 in Annex XIII (1) (a) refers to Annex VI Part A: \n8. the hazardous substances present in the battery, other than mercury, cadmium or lead;\nAdditionally in Article 13:\n5. All batteries containing more than 0,002 % cadmium or more than 0,004 % lead, shall be marked with the chemical symbol for the metal concerned: Cd or Pb.\nDefined in Article 3:\n(52) \"hazardous substance\" means a substance classified as hazardous pursuant to Article 3 of Regulation (EC) No 1272/2008.",

                 "description": "Entity for the material composition.",

                         "description": "The chemical material name and identification, in accordance with the specification in the attribute for the list type. Preference is given to the IUPAC name. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Article 7:\n(5) (a) the name of the substances of concern present in the product, as follows:\n - name(s) in the International Union of Pure and Applied Chemistry (IUPAC) nomenclature, or another international name when IUPAC name is not available; \n- other names (usual name, trade name, abbreviation);\n- European Community (EC) number, as indicated in the European Inventory of Existing Commercial Chemical Substances (EINECS), the European List of Notified Chemical Substances (ELINCS) or the No Longer Polymer (NLP) list or assigned by the European Chemicals Agency (ECHA), if available;\n- the Chemical Abstract Service (CAS) name(s) and number(s), if available; .",

                         "description": "Concentration of the material at the level of the product. This attribute is specially mentioned for substances of concern mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (c) the concentration, maximum concentration or concentration range of the substances of concern, at the level of the product [...].\nOther substances are mentioned for the purpose of recycling in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(d) design for recycling, ease and quality of recycling as expressed through: use of easily recyclable materials, safe, easy and non-destructive access to recyclable components and materials or components and materials containing hazardous substances and material composition and homogeneity, possibility for high-purity sorting, number of materials and components used, use of standard components, use of component and material coding standards for the identification of components and materials, number and complexity of processes and tools needed, ease of nondestructive disassembly and re-assembly, conditions for access to product data, conditions for access to or use of hardware and software needed.\n",

                         "description": "The unit of concentration chosen from an enumeration: mass percent, volume percent, parts per thousand, parts per million, parts per billion and  parts per trillion.",

                         "description": "A flag, if the material is a critical raw material. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;\nIn Annex II of the connected proposal Act of Critical Raw Materials, a list of critical raw materials can be found.",

                         "description": "Documentation accompanying the material.",

                         "description": "The share of the material, which is recovered recycled content from the product. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(h) use or content of recycled materials and recovery of materials, including critical raw materials;",

                         "description": "The location of the substances of concern within the product. This attribute is mentioned in the ESPR proposal from March 30th, 2022 Article 7:\n(5) (b) the location of the substances of concern within the product.",

                         "description": "The share of the material, which is from a renewable resource that can be replenished. Renewable resources are those that can be reproduced by physical, chemical, or mechanical processes. These are the kind of resources that can be regenerated throughout time. Forest wood, for example, can be grown through reforestation. This attribute is mentioned in the ESPR provisional agreement from January 9th, 2024 Annex I:\n(ha) use or content of sustainable renewable materials;\n",

                 "description": "List for the material composition.",

                 "description": "Chemical Material Characteristic for the battery.",

                         "description": "The active materials included in the battery. Mandatory are nickel, lithium, cobalt and lead. Others are optional. Defined by the Battery regulation 2023/1542 from 12 July 2023 in Article 3 Definitions:\n(5) ‘active material’ means a material which reacts chemically to produce electric energy when the battery cell discharges or to store electric energy when the battery is being charged.",